This is an Add-On to a new Ferguson. Do you know what it is? The item pictured is a steering accessory sold by the Kosch company. They were located in Columbus, Nebraska.  Some of the original advertising gave you the impression the device would provide “power steering.” The device was actually a fairly effective anti-kickback Read more about Kosch Anti-Kickback Accessory[…]

What is the part number for the Power Take Off cover on a 1956 F40. The original part number for the PTO cap is 180313M1. The F-40 PTO cap is the same as the one used on the TO-35, MF-35, MH-50, MF-50, MF-65, MF-135, MF-150, MF-165, MF-175, and many later MF tractors. The shape of Read more about Power Take Off Cover on an F-40[…]

How can I tell if I have an original Ferguson Top Link, and what is the best way to repair the ends?. October 31, 2016. There are 3 versions of the two piece, flat bar top link. The first version came with the first 9N tractors, and is held together with 2 carriage bolts. These Read more about Original Top Link Repairs[…]

Will a Davis loader from a TO-30 fit on a TO-35? July 5, 2016. Yes a Davis loader from a TO-30 should fit a TO-35, providing you have the right mounting brackets. There should be no difference in the rear mounting, but I am not sure about the front mounting. The TO-35 has a more Read more about Davis Loader from a TO-30 on a TO-35[…]

Would you have any idea where I might find an upper drawbar stay for a Tea-2085? July 15, 2016. I do have some original NOS drawbar stays. The uppers are the late production version that have the very top part turned out. The early version has the very top part turned in. I will have Read more about Drawbar Stays[…]

Will Ford rear Pie Weights fit on my TO 20? August 3, 2016. I believe the pie weight attaching disc is attached with the same special nuts used with the dual wheel kits. The wheel studs on Fords, and Ferguson’s are different sizes. if the same type special nuts used with the dual rear wheel Read more about Ford Pie Weights on a Ferguson[…]

What was the original finish on the Linch Pins and Chain? August 7, 2016. The original finish on linch pins, and other hitch parts were originally plated in “Yellow Zinc.” You may be able to find a plating service near you that can re-plate them. Another option is Eastwood, 800-343-9353, a company that makes a Read more about Original Finish on Linch Pins[…]

Were the TEA 20s that came to North America come equipped with Hall lamps, and the little wings? August 10, 2016. As far as I know, none of the TO-20, TE-20, TEA-20, and their derivatives came with factory installed lights other than the TE industrial models. Harry Ferguson Limited supplied UK sourced lighting kits as Read more about Hall Lamps on North American TEA-20’s[…]

Where can I buy the brackets that hold crank on my 1949 Fergie it in place? August 18, 2016. The crank retaining clips are in later editions of the TE/TEA/TO-20, TO-30 parts books, but I am well aware that parts like a crank retaining clip might not appear in these later editions of the parts Read more about Crank Retaining Clips[…]