I am restoring a 1953 TO 30. What do I use for Dash Hood Bumpers? Dash Hood Bumpers are a standard item available at most automotive parts stores, and many hardware stores. If you are unable to find them locally I can sell you a set. Steiner Tractor Parts does sell a replacement bumper, but Read more about Dash Hood Bumpers[…]
I am restoring a 1953 TO 30. The bolt in the Pin Assembly Pivot does not seem to be right. What am I supposed to have? The bolt should screw into threads in the front axle support. If it has the original front axle support the bolt should be 5/8″ fine thread as I recall, Read more about Pin Assembly Pivot[…]
I don’t have an original TO-30 hydraulic oil dipstick to measure. I should have the later MF-35 version but I have to locate it to measure it. The same goes for the TO-30 engine oil dipstick. The original TO-30 hydraulic oil dipstick is prone to breaking off the handle. The original design has a bend Read more about TO-30 Oil and Hydraulic Dipstick[…]
Is the Ferguson D-137-D Seed Drill a rebadged Dempster unit? I guess you could call it that. This is another one of those implements Ferguson contracted to have built to their specifications. Actually all Ferguson implements were built by others. In some cases several companies made parts that were assembled into a Ferguson implement. In Read more about D-137-D Seed Drill A Rebadged Dempster[…]
Can you tell me what the market value of my 1955 TO-35 in good running condition, with a 2-bottom plow is? It’s impossible for me to tell you what your tractor is worth without actually seeing it, hearing it run, driving it, etc. Your best bet for establishing the going price in your area is Read more about Market Value 1955 TO-35 with Plow[…]
The carburetor on my TO-20 has worn bushings for the “butterflys”. Are there parts or comprehensive kits available for Marvel-Schebler carburetors that include these bushings? Yes, many of the deluxe carburetor kits come with bushings, some even come with bushings for the choke shaft as well as the throttle plate or main shaft. There is Read more about Marvel-Schebler Carburetor Bushings[…]
I’m having trouble replacing the steel sleeve on the PTO assembly for my TO-20, and I do not understand why it does not fit. Can you help? I believe the problem is with the bushing you received. The bushing used on the later production 9N, 2N, TE-20, TO-20 and TO-30 are the same. There is Read more about TO-20 PTO Shaft Sleeve[…]
I removed the hydraulic lift cover on my 35, and discovered the rear two bolts holding the work cylinder to the lift cover are broken, and the work cylinder is tilted down at the back. The rear of the work cylinder shows signs of hard impact. What could have caused this? I noticed what appears Read more about Broken Hydraulic Cylinder on 35[…]